The mode will change every time the button is pressed. The tracks on the disc will be played back in a random sequence. To cancel M.
If you wish to access the beginning of a file further back, repeatedly press until you reach the desired file. However, Except for personal enjoyment, duplicating audio data sometimes the file names, folder names, etc.
Moreover, you can choose between 3 settings to suit your own personal sound preferences usage. If you want to see the frequency display, press and hold the BAND button for at least 3 seconds the frequency is displayed for 5 seconds , and then you return to the display that you selected with the steps INFO button for at least 2 seconds.
Opening the battery cover Slide out the battery cover while firmly pressing the direction of arrow. Replacing the battery Put the batteries in the case observing the polarities as illustrated. Insert the magazine again. Do not tap into these leads to provide power for this unit. If your vehicle does not have the Mounting Support, reinforce Your Alpine dealer carries various noise suppressors, contact them for further information. This manual is also suitable for: Cdar.
Print page 1 Print document 44 pages. Rename the bookmark. Delete bookmark? For routine cleaning, wipe the playing surface with a clean, soft cloth from the centre of the disc to the outer edge. If the surface is heavily soiled, dampen a clean, soft cloth in a solution of mild neutral detergent before cleaning the disc. There are various accessories available on the market for protecting the disc surface and improving sound quality.
Using such accessories can cause the disc to be out of standard specifications and may create operational problems. We recommend not using these accessories on discs played in Alpine CD players. Align the groove on the front panel with the projection on the main unit.
You can operate this unit from the vehicle's control unit when an Alpine Remote Control Interface Box optional is connected. For details, contact your Alpine dealer. Soon after resetting the unit or after turning the unit on the first time, the demonstration starts automatically. The unit can be turned on by pressing any other button except the eject c button. The volume level gradually increases to the previous level you were listening to before the unit was turned off. The very first time the power is turned on, the volume will start from level The movable display may be adjusted to 3 different angles depending upon user preference.
There is no need to re-adjust the angle when the power is turned back on. Keep hands or any other object away from the display while it is opening or closing to avoid damage or injury. The back of the movable display will get very warm under normal operating conditions. This is not a malfunction. Do not touch. When the Blackout mode is turned on, the display will turn off to reduce power consumption.
OUT button for at least 3 seconds to start the blackout mode. By doing so the display will turn off. If any button on the unit is pressed during the blackout mode, the function will be displayed for 5 seconds to show the operation before returning to Blackout mode. To cancel the blackout mode, press and hold the B.
OUT button for at least 3 seconds. You can select the display pattern mode from three display patterns. You can also deactivate the display. You can change the Bass Frequency emphasis to create your own tonal preference. Press the g DN or f UP button to select the desired bass centre frequency.
A wide setting will boost a wide range of frequencies above and below the centre frequency. A narrower setting will boost only frequencies near the centre frequency. You can change the Treble Frequency emphasis to create your own tonal preference. Press g DN or f UP button to select the desired treble centre frequency.
The High and Low Pass Filters on this unit can be adjusted to suit your personal taste. Outputs all frequencies higher than that selected according to your preference. The distance between the listener and the speakers in a car vary widely due to the special conditions of the mobile environment. This difference in the distances from the speakers to the listener creates a shift in the sounds image and frequency characteristics. This effectively creates a perception of increased distance for those speakers.
The listener can be placed at an equal distance between the left and right speakers for optimum staging. Adjust the time correction level of the front left speaker to a high value and the rear right to zero or a low value. Here we calculate the time correction value for the front left speaker in the diagram at the left. In other words, giving the front left speaker a time correction value of 5. The sound is not balanced because the distance between the listening position and the various speakers is different.
The difference in distance between the front left speaker and the rear right speaker is 1. Time correction eliminates the differences in the time required for the sound to reach the listening position. The time of the front left speaker is corrected by 5. You cannot change the Time Correction value for the subwoofer, but you can set the subwoofer's apparent position to the front by adjusting the Time Correction value of the front and rear speakers.
With an initial delay of 0. CORR to return to the normal mode. Delay turn the rotary encoder the audio signal to the front left and right speakers to make the apparent position of the subwoofer to be at the front.
In doing this, the apparent position between the front left and right speakers and subwoofer will appear equal to the driver. After performing above, you can change the positions of left and right speakers by delaying the time. CORR button. Time Correction mode is automatically cancelled if no buttons are pressed within 15 seconds. MX Media Xpander makes vocals or instruments sound distinct regardless of the music source.
The radio, CD and MP3 will be able to reproduce the music clearly even in cars with a lot of road noise. The medium to high frequencies become more clear, and produces well balanced sound in all the bands. CD mode processes a large quantity of data. This data is used to reproduce the sound cleanly by making use of the data quantity. This corrects information that was omitted at the time of compression. This reproduces a well-balanced sound close to the original. This disk contains a large quantity of data such as music clip.
MX uses this data to reproduce the sound accurately. The mode changes to the. The Q. It is possible to display the CD title if the title has been previously inputted. Text information, such as the disc name and the track name, will be displayed if playing a CD text compatible disc. It is also possible to display the folder name, the file name, and the ID3 tag, etc. Title: With this device, it is possible to input the CD name refer to page Text: Text compatible CDs contain text information such as the disc name and track name.
ID3 tag information is displayed e. The first character will blink. The first character will stop blinking and the display will automatically advance to the next character. When that character begins to blink, you may choose the next letter or symbol of your title.
Pressing the Rotary encoder after entering the 8th character, automatically stores the title into memory. When entering a title of less than 8 characters for example, 3 character title :. The input mode will be cancelled if no action is taken for over 10 seconds. Use caution when manipulating the power cord. Then, press and hold the button for at least 3 seconds. The title in the display will blink.
The SEEK indicator illuminates. With the DX mode activated, both strong and weak stations will be tuned in the Auto-Seek operation. Press again to return to the local mode.
Now, only strong stations will be tuned. Press and hold the Preset buttons 1 through 6 that you want to store the station on for at least 2 seconds.
Close Privacy Overview This website uses cookies to improve your experience while you navigate through the website. Out of these cookies, the cookies that are categorized as necessary are stored on your browser as they are as essential for the working of basic functionalities of the website.
We also use third-party cookies that help us analyze and understand how you use this website. These cookies will be stored in your browser only with your consent.
You also have the option to opt-out of these cookies. But opting out of some of these cookies may have an effect on your browsing experience.
Necessary Necessary.
0コメント