If any pieces are missing or appear damaged, contact your dealer immediately. Adjust the strap to fit snugly. Refasten the strap, and fold the flap back down. Attach the lens cap To protect the lens, attach the provided lens cap to the camcorder as shown in the illustration. Chapter Page Attach The Power Supply Since the battery must be charged before it can be used the first time, you need to use an AC outlet to power the camcorder. Plug the small end of the power supply into the DC IN jack on the camcorder.
Plug the other end of the power supply into a working AC outlet. Focus, exposure, iris Open the LCD monitor fully or adjust the viewfinder. The camcorder is now in the record- pause mode. Play your recording Set the Power switch to indicator comes on. Close the LCD monitor. Powering the Camcorder You can power your camcorder with a battery or AC power. Make sure the battery is attached to the camcorder. Remove the battery and try again. Page Refreshing The Battery If you store a partially charged battery for a long period of time, its performance is reduced.
Page Battery Level Icon After repeated charging and use, battery life gradually decreases. When operation time is too short to be useful, the battery should be replaced.
Following the illustration, thread the strap through the eyelet. Under normal conditions, this battery should last for 10 years or more. If you should need to replace it, see your nearest RCA authorized service center. Press the MENU dial in. When you close the LCD monitor, the viewfinder turns on. Cautions Never force the LCD monitor to rotate completely around.
For convenient viewing, rotate the viewfinder up or down. Although it may look crowded, all of the icons shown below do not appear on-screen at the same time. Also, not all screen icons are shown in the illustration. Page Recording And Playback Icons battery, etc. If they do, you can resume using the camcorder. If the warnings remain, consult your nearest RCA authorized service center.
Recording and Playback Icons Page 35 Status Icons Appears when the camcorder is recording. Appears during record-standby.
Appears during play-pause. Appears during fast forward and flashes during forward search. Appears during rewind and flashes during reverse search. These icons flash while you adjust manual focus see page Time Counter Icon Appears during playback. It is not recorded. An M appears in front of M the time counter when memory-stop is on see page Time-Remaining Icon Indicates the approximate time remaining on the tape.
Page Self-Recording so that it faces forward, then point the lens toward yourself and start recording. Quick Review You can check the end of the last recording. Make sure the camcorder is in the Record— Standby mode. Press and release quickly.
The tape is Page Digital And Optical Zooming You can zoom in and out for close-up or wide-angle shots by moving the zoom lever on the camcorder.
The camcorder automatically focuses at most distances when zooming. Optical zooming is possible up to 16 times, and digital zooming allows up to times normal magnification.
Switch off stabilization when the camcorder is mounted to a tripod. Recording manual record. If the Page Using The Video Light Using the Video Light To brighten the scene when natural lighting is too dim, the camcorder uses a built-in video light. You can turn on the video light at all times, set to turn on automatically when the camcorder senses additional light is needed, or turn off altogether. Basic Playback Insert a tape. You can also view the playback picture on the LCD monitor with it flipped over and retracted.
Page 50 AT blinks. When Auto Tracking finishes, the icon disappears. This is normal. Press during playback. Page Choose Your Connection Before choosing a connection, you may find it easier to use the cassette tape adapter. The camcorder uses a smaller size tape, but records in standard VHS format. Once it is reached, press on the camcorder. These pictures can be transferred to a PC, saved, and edited using the included cable and software.
Chapter 5 Digital Still Camera Setting the Picture Quality You can adjust the picture quality to fine or standard, depending on what kind of picture you want.
You can view them using the Index and Slideshow features. Set the Power switch to DSC indicator comes on. Selected Image The image you have selected is highlighted with a box.
The DSC indicator comes on and a snapshot stored in memory is displayed. Press in the MENU dial. When finished, the screen becomes blue. Very important: Never turn off the camcorder or remove the power battery or AC while the memory is being erased. The built-in memory may become corrupt. To assure safety, make sure all units are turned off before making any connection. Allows you to record black bars at the top and bottom of the screen to produce a cinema-like wide-screen effect.
Page 81 so you will not have to go through the main menu. Then press in the MENU dial again to select it. Note: When a tape is loaded in the camcorder, the demonstration is not available. Automatic demonstration will not take place. Fade-ins or wipe-ins work at recording start, and fade-outs or wipe-outs work at recording end.
Wipes out as a new image, pushing open the black screen vertically from the center. For additional information, see the Global Shipping Program terms and conditions - opens in a new window or tab This amount includes applicable customs duties, taxes, brokerage and other fees. For additional information, see the Global Shipping Program terms and conditions - opens in a new window or tab.
Start of add to list layer. Sign in for more lists. Dec 17, PST. May not ship to Germany - Read item description or contact seller for shipping options. See details. Seller's other items. Sell one like this.
Related sponsored items. Showing Slide 1 of 2. Free shipping Free shipping Free shipping. Last one Last one Last one. Seller Similar sponsored items. Seller assumes all responsibility for this listing. Item specifics. Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is Read more about the condition Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended.
0コメント